Enter the name or ID of the equipment request
Total: 44

received
Request ID: req.g8syes
Estimated cost

17.25 thousands of euros

CCUSE

CCUSE "Laboratory of biosafety, quality of food products and food safety"

Functional purpose of the equipment

Qualitative and quantitative characteristics of food products, raw materials and other materials

Motivation of the need for equipment

To analyze and control the quality of raw materials, semi-finished products and finished products according to the appropriate methods


received
Request ID: req.kwadex
Estimated cost

69.95 thousands of euros

CCUSE

Laboratory of Advanced Technologies, Creation and Physico-Chemical Analysis of a New Substances and Functional Materials

Functional purpose of the equipment

Elemental analyzer for simultaneous determination of carbon and sulfur content in organic and inorganic samples

Motivation of the need for equipment

We are ensuring the implementation of fundamental and applied research, creating conditions for conducting joint scientific research by domestic and foreign higher education institutions and scientific institutions, and developing an innovative educational, scientific, and entrepreneurial environment.


received
Request ID: req.j3z2zr
Estimated cost

137.57 thousands of euros

CCUSE

Laboratory of Advanced Technologies, Creation and Physico-Chemical Analysis of a New Substances and Functional Materials

Functional purpose of the equipment

A fast, susceptible method for the identification and quantification of impurity elements in gaseous, liquid and solid substances, including in highly pure

Motivation of the need for equipment

We are ensuring the implementation of fundamental and applied research, creating conditions for conducting joint scientific research by domestic and foreign higher education institutions and scientific institutions, and developing an innovative educational, scientific, and entrepreneurial environment.


received
Request ID: req.q588d0
Estimated cost

31.20 thousands of euros

CCUSE

Laboratory of Advanced Technologies, Creation and Physico-Chemical Analysis of a New Substances and Functional Materials

Functional purpose of the equipment

Samples preparation for spectral analysis with inductively coupled plasma

Motivation of the need for equipment

The rationale, marketing research, development plan, etc. are deployed if available.


received
Request ID: req.kwa0a8
Estimated cost

1839.00 thousands of euros

CCUSE

Laboratory of Advanced Technologies, Creation and Physico-Chemical Analysis of a New Substances and Functional Materials

Functional purpose of the equipment

It allows for obtaining high-resolution images of the sample surface, which is convenient for studying the structure of the scanned surface. Additional methods (EDX, WDX) allow obtaining information about the chemical composition of near-surface layers.

Motivation of the need for equipment

It is ensuring the implementation of fundamental and applied research, creating conditions for conducting joint scientific research by domestic and foreign higher education institutions and scientific institutions, and developing an innovative educational, scientific, and entrepreneurial environment.


received
Request ID: req.psqdah
Estimated cost

117.46 thousands of euros

CCUSE

Laboratory of Advanced Technologies, Creation and Physico-Chemical Analysis of a New Substances and Functional Materials

Functional purpose of the equipment

An instrument for studying phase transitions such as melting, glass transitions, or exothermic decompositions.<br /> It measures the difference in the amount of heat required to raise the temperature of the sample and standard as a function of temperature with high accuracy.

Motivation of the need for equipment

It ensures the implementation of fundamental and applied research, creates conditions for conducting joint scientific research by domestic and foreign higher education institutions and scientific institutions, and develops an innovative educational, scientific and entrepreneurial environment.


received
Request ID: req.kwas3g
Estimated cost

73.15 thousands of euros

CCUSE

Center of collective employment of research equipment «Laboratory of experimental and applied physics»

Functional purpose of the equipment

Qualitative and quantitative determination of major and minor elements in a wide variety of sample types - from oils and liquids to solids, metals, polymers, powders, pastes, coatings and thin films

Motivation of the need for equipment

The main purpose of purchasing this device is to perform high-precision studies of the structure of substances of different aggregate states (solids and liquids), qualitative and quantitative analysis of their chemical composition, as well as to find out the nature of these features in order to purposefully change physical and chemical properties to produce materials that meet the needs of various industries (chemistry, physics, medicine, pharmacy, biology, etc.), including defence.


received
Request ID: req.m68cst
Estimated cost

39.02 thousands of euros

CCUSE

CCUSE "Laboratory of biosafety, quality of food products and food safety"

Functional purpose of the equipment

Equipping the Kinexus Pro+ rotary rheometer with additional parallel plates-geometries will allow to expand the measurement range of a wide range of materials, for Newtonian and non-Newtonian fluids with low viscosity to more viscous dispersed systems: gel-like materials, soft and hard substances, polymers and others systems The wide range of plate sizes is due to the measurement of materials with different rheological parameters.

Motivation of the need for equipment

Smaller diameter geometries are used for samples with high viscosity, and larger ones (Ø50 mm) for materials with low viscosity (0.1 Pa*s). In addition, geometries with a toothed surface are used to study emulsions and suspensions, which are prone to slipping. This manifests as an early drop in viscosity during shear rate measurement, resulting in a sudden drop in viscosity and suspected slippage. This surface interface provides additional adhesion of the material to the geometry, and stimulates the smooth flow of the material. Using geometries of different diameters will allow for a more smooth variation of the gaps between the geometries in the measurement and follow general rules of thumb, and will provide sufficient interaction to eliminate wall effects that cause artifacts in the results. The possibility of combining the geometries of the cone and the plate will allow to measure the geometries at the set gap (automatically controlled by the software). This allows absolute viscosity to be measured when the entire sample is subjected to the same shear rate, a significant advantage over parallel plate geometries that have a range of shear rates along their radii and only the average value is reported. For the study of materials and systems sensitive to temperature effects, or in which phase changes/transitions occur under the influence of temperature, elimination of temperature gradients, and when measuring temperatures significantly higher or lower than the ambient temperature, a cartridge is needed for setting temperatures when measuring from -5C up to 180°C, or from -40°C with an active heat exchanger. The cartridge is a combination of a Peltier element with additional heaters for active control of radial and vertical heat losses from the local environment of the sample with a resolution of 0.01°C, with measurement stability of +/- 0.1°C.


received
Request ID: req.c2z505
Estimated cost

126.18 thousands of euros

CCUSE

Center for the collective use of scientific equipment for the latest agricultural technologies «LABORATORY OF ECOLOGICAL AGRICULTURE AND NATURE MANAGEMENT»

Functional purpose of the equipment

De novo Sanger sequencing<br /> • Targeted sequencing<br /> • Plasmid sequencing<br /> • Conducting research in the field of oncology<br /> • Identification of the individual<br /> •Confirmation of results obtained by next-generation sequencing (NGS)<br /> • Identification of single nucleotide polymorphisms (SNP)<br /> •Research of hereditary diseases<br /> •Analysis of short tandem repeats

Motivation of the need for equipment

Providing research projects with access to modern equipment and technologies for the study of genomics. The commissioning of the DNA Sequencer will meet this goal, allowing our researchers to perform high-precision DNA sequencing, which is a key step in a number of scientific projects in the fields of biology, medicine, agriculture and others.<br /> The results of our user needs analysis indicate a significant need for DNA sequencing as part of their research projects. The large number of requests and inquiries from our customers indicates a high interest in the sequencing capabilities at our facility. In addition, specialized consultations with leading scientists in the field also confirmed the importance of having a DNA Sequencer to meet the needs of our users.<br /> Our center conducted a detailed marketing research, which revealed a great need of our target audience for DNA sequencing services. The market analysis showed that the availability of the DNA Sequencer will allow our center to compete effectively in the market of scientific services and attract new users.<br /> The inclusion of the DNA Sequencer in our equipment corresponds to the strategic development plan of our center. This equipment meets the needs of our scientific community, and its addition will allow us to expand the range of services provided by our center, thus ensuring its sustainable development and increased profitability.<br /> The DNA sequencer opens up new opportunities for our customers in conducting research in the field of genetics, evolutionary biology, disease diagnostics and other related fields. The introduction of this equipment will increase our competitiveness and open up new opportunities for our customers to realize their research goals.


received
Request ID: req.c2h2qw
Estimated cost

224.55 thousands of euros

CCUSE

Center for the collective use of scientific equipment for the latest agricultural technologies «LABORATORY OF ECOLOGICAL AGRICULTURE AND NATURE MANAGEMENT»

Functional purpose of the equipment

An atomic absorption spectrophotometer (AAS) is an important tool in analytical chemistry used to determine the amount of certain chemical elements in samples. The functional purpose of this device is to accurately measure the absorption of light by atoms or ions of elements in the sample.<br /> <br /> The main work of an atomic absorption spectrophotometer is based on the phenomenon of atomic absorption, when the atoms of the element under consideration absorb light of certain wavelengths. This absorption capacity depends on the concentration of the element in the sample. AAS can measure element concentrations at very low concentrations, making it indispensable for various fields such as medicine, agrochemistry, pharmaceuticals, environmental science, and others.<br /> <br /> The main functions of an atomic absorption spectrophotometer include:<br /> <br /> Quantitative analysis: AAS allows the precise determination of the concentration of a specific chemical element in a sample, which is necessary for quality control, research and other analytical tasks.<br /> <br /> Qualitative analysis: The increased specificity of AAS allows determining the presence of certain elements in a sample, which helps in the identification of substances and the detection of impurities.<br /> <br /> Multi-element analysis: Some modern AAS models can simultaneously analyze several elements in a sample, making them very efficient for complex studies.<br /> <br /> Low sample volume requirement: AAS can work with very small sample volumes, saving materials and simplifying sample preparation.<br /> <br /> High sensitivity and precision: These characteristics make AAS an indispensable tool for research where it is necessary to measure even the smallest concentrations of elements

Motivation of the need for equipment

The main purpose of purchasing this equipment is to ensure the accuracy and efficiency of the analysis of various substances, including metals and their compounds in various materials. This is necessary to ensure a high level of quality control of products manufactured by our company.<br /> Based on an analysis of our current work and needs for analytical equipment, we have determined that existing analytical tools do not meet our needs for high-precision and rapid measurement of metal levels. Existing methods do not provide sufficient sensitivity and accuracy. This leads to delays in the quality control process and can cause losses due to the release of low-quality products.<br /> We have conducted a thorough marketing research on the analytical equipment market and found that Atomic Absorption Spectrophotometers meet our needs best. They provide high sensitivity, accuracy and speed of metal analysis in various samples. Many competing companies are already successfully using this equipment to maintain high standards of quality and production efficiency.<br /> In our plan for the development of TsKKNO, we envisage expanding our capabilities in the field of analysis and quality control. The acquisition of an Atomic Absorption Spectrophotometer fits into this plan, as it will allow us to raise the bar for the quality of our services, providing more accurate and faster analysis results.<br /> in addition, the use of the Atomic Absorption Spectrophotometer will increase our competitiveness in the market, providing customers with the highest quality products and services. It will also increase trust in our organization among partners and consumers. Thus, the purchase of this equipment corresponds not only to current needs, but also to the strategic direction of our Center's development