Enter the name or ID of the equipment request
Total: 44

received
Request ID: req.g8xjhc
Estimated cost

128.00 thousands of euros

CCUSE

Materials science of refractory compounds and composites

Functional purpose of the equipment

Sync allows you to examine particles using laser radiation, while a high-speed digital camera captures images. The collected data is processed by Flex software and provides the user with information about the size and shape of the particles

Motivation of the need for equipment

The purchase of this equipment will allow faster and more accurate determination of particle size and morphology


received
Request ID: req.j3028f
Estimated cost

205.00 thousands of euros

CCUSE

Materials science of refractory compounds and composites

Functional purpose of the equipment

Investigation of micro, nanostructure and local chemical composition of metal, ceramic, polymer, composite and organic materials

Motivation of the need for equipment

The service life of the only scanning electron microscope available at the CSCNI to control the microstructure of materials, according to the device's passport data, is 10 years. It has been in operation for 16 years and has performed more than 150 thousand experiments.


received
Request ID: req.q5080x
Estimated cost

125.00 thousands of euros

CCUSE

Materials science of refractory compounds and composites

Functional purpose of the equipment

Study of the chemical composition of metals and alloys

Motivation of the need for equipment

The chemical composition equipment available at the CCCNR does not allow for the measurement of metals and alloys, as it does not have the ability to determine the content of light elements (carbon, oxygen, boron, etc.). The absence of this capability does not allow for adequate research to identify most of the alloys that are actively used by industry


received
Request ID: req.kwt05p
Estimated cost

800.00 thousands of euros

CCUSE

Materials science of refractory compounds and composites

Functional purpose of the equipment

Measurement of mechanical characteristics of metal, ceramic, polymer and composite materials in the temperature range of 20℃-1600℃. Possibility of tensile, bending, compression, and creep tests in the specified temperature range

Motivation of the need for equipment

This equipment is not available in any scientific or commercial institutions in Ukraine. Research in a wide range of temperatures is essential for both industrial enterprises in the rocketry industry and scientific institutions.


received
Request ID: req.psbddm
Estimated cost

100.20 thousands of euros

CCUSE

Materials science of refractory compounds and composites

Functional purpose of the equipment

Investigation of micro, nanostructure and local chemical composition of metal, ceramic, polymer, composite and organic materials

Motivation of the need for equipment

The process of cognition, both educational and scientific, in materials science is not possible without chemical composition and microstructure control devices. The results of scientific research performed not on modern devices are not accepted for publication in professional journals in Europe and the world. Therefore, we offer another microscope analyzer with a half lower price and warranty service from Novation. The service life of the only scanning electron microscope available at the CSCCNI to control the microstructure of materials according to the device's passport data is 10 years. It has been in operation for 16 years and has performed more than 150 thousand experiments.


received
Request ID: req.kww35p
Estimated cost

192.50 thousands of euros

CCUSE

Center of collective employment of research equipment «Laboratory of experimental and applied physics»

Functional purpose of the equipment

High-precision studies of the surface structure of solids and the elemental composition of the surface.

Motivation of the need for equipment

The main objective is to study the surface condition of solid materials (defects and homogeneity) in order to determine their suitability for use in devices of various functional purposes


received
Request ID: req.pssw6j
Estimated cost

57.50 thousands of euros

CCUSE

Center of collective employment of research equipment «Laboratory of experimental and applied physics»

Functional purpose of the equipment

Study of the mechanical properties of solid materials in a wide range of loads (from 980.7mN to 490.3N) in automatic mode.

Motivation of the need for equipment

The main goal is to study the mechanical properties of solids, in particular the photoplastic effect in superionic crystals, as elements of protective coating materials, as well as to ensure quality control of various special-purpose structural materials that are promising for use in various sectors of the defence industry.


received
Request ID: req.m6dhy5
Estimated cost

5.00 thousands of euros

CCUSE

Center of collective employment of research equipment «Laboratory of experimental and applied physics»

Functional purpose of the equipment

Study of the propagation speed and attenuation coefficient of ultrasonic waves in crystalline materials.

Motivation of the need for equipment

The main goal is to determine the acousto-optical parameters of solids in order to find materials that are most effective for creating active elements of modulators and deflectors of optical radiation that can be used in military equipment.


received
Request ID: req.q5ck0x
Estimated cost

1830.00 thousands of euros

CCUSE

Centre for Shared Use of the Electron Microscope and Laser Sedimentograph of the Department of Earth Sciences of the National Academy of Sciences of Ukraine

Functional purpose of the equipment

SEM JSM-IT700HR application to establish morphological features at the micro and nanoscale; microanalysis system application to determine and interpret the chemical composition (macro- and microelements) of various geological formations, in particular, the 200 nm diameter zone, which will significantly exceed the capabilities of the existing equipment and expand the Centre's capabilities.

Motivation of the need for equipment

Application of the SEM JSM-IT700HR to establish morphological features at the micro and nanoscale; usage of the microanalysis system to determine and interpret the chemical composition (macro- and microelements) of various geological formations, in particular, the 200 nm diameter zone, which will significantly exceed the possibilities of the existing equipment and expand the Centre's possibilities.


received
Request ID: req.kwgdk1
Estimated cost

128.68 thousands of euros

CCUSE

Centre for Shared Use of the Electron Microscope and Laser Sedimentograph of the Department of Earth Sciences of the National Academy of Sciences of Ukraine

Functional purpose of the equipment

Study of the particle size distribution and related properties of formation units with prospects for critical and strategic mineral raw materials and other different types of geological formations to solve fundamental and applied problems of geology, lithology, mineralogy, engineering geology, materials science, etc.

Motivation of the need for equipment

Profound modernisation of the particle size analysis system (analysis of particle size and shape distributions) by purchasing a Horiba LA-960 particle size analyser. The requested laser particle size analyser, in addition to other new features, is characterised by a wider measurement range (0.01-3000 µm) compared to the Mastersizer-2000 sedimentograph currently installed in the laboratory. Thus, it will significantly expand the possibilities for measuring structural features / particle size distribution of various types of geological formations and other substances and materials.